When your washer or dryer breaks down it is a real problem. You do not need to go to the laundromat or let the dirty clothes pile up! Call us for same-day repairs. Pick the affordable and reliable appliance repair company that provides same-day service, Champion Chandler Appliance Repair.
Our technicians carry the tools, have the training, and have years of experience fixing complete common and complicated repairs during their initial service appointment. We fill our vans with common manufacturer parts for all the major brands of washers and dryers including GE, Carrier, LG, Kenmore, Goodman, Bryant, Sears, Armstrong, Lennox, RCA and more!
WASHER PROBLEMS
LOUD/CONSISTENT NOISES
The most common reason we get called to check out a washer is a loud noise. Our experienced repairmen check out the problem and will tell you if you need to buy a new part of if they fix the old one. A worn belt, bad bearings, or a broken pump motor are the most common causes of loud noises from your washer.
WON’T TURN ON/AGITATE
When a washing machine does not turn on, make sure it is unplugged and the circuit breaker has not flipped off. Then call us. Your problem may be a broken door latch, timer, or thermal fuse. When the washer won’t agitate the coupler, agitator cogs, drive belt or transmission need to be repaired or replaced.
WON’T SPIN
When a washer won’t spin, there is a problem with the door latch, wax motor, or motor coupling. We can fix these problems on the spot on a same-day service call.
OVERFLOWS
When your washer overflows, turn it off, mop up the water, and call us. The common reasons for a washer overflowing are problems with the water level pressure switch, water inlet valve, or the air dome tube.
NO HOT/COLD WATER
When your washer will not give you either hot or cold water there is a broken temperature control switch or a problem with the inlet hose. Call us for a same-day fix.
DRYER PROBLEMS
LOUD/CONSTANT NOISES
The most common dryer problem we get called for is a loud noise emanating from the appliance. The noise is typically from a broken bearing, damaged seal, or a worn belt. Call us for same-day repairs.
NO HEAT/WON’T DRY
When your dryer will not heat up it has a broken heating element, malfunctioning high limit thermostat, bad cycling thermostat. Like these parts can malfunction in such a way as to make your dryer overheat. One a single service call our trained technician can diagnose and fix the problem.
WON’T TURN ON/TUMBLE
When the dryer won’t turn on make sure it is plugged in and the circuit breaker has not tripped. This problem is typically caused by a damaged heating element, cycling thermostat problem, or broken high limit thermostat. When the dry will not tumble the problem is commonly with the cycling thermostat or high limit thermostat which will need to be repaired or replaced.
WON’T TURN OFF
A broken door switch or broken timer the problems that keep a dryer for turning off. Don’t get in the habit of just unplugging the dryer. Call us for a same-day repair.
TIMER WON’T ADVANCE
Your dryer will not complete its cycle if the timer does not advance. This problem occurs with a broken timer motor or malfunctioning cycling thermostat.